Table of Contents
4 Zabbix agent 2 (UNIX)
Overview
Zabbix agent 2 is a new generation of Zabbix agent and may be used in place of Zabbix agent.
This section lists parameters supported in a Zabbix agent 2 configuration file (zabbix_agent2.conf). Note that:
- The default values reflect process defaults, not the values in the shipped configuration files;
- Zabbix supports configuration files only in UTF-8 encoding without BOM;
- Comments starting with "#" are only supported in the beginning of the line.
Parameters
| Parameter | Mandatory | Range | Default | Description | |
|---|---|---|---|---|---|
| Alias | no | Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one. Multiple Alias parameters may be present. Multiple parameters with the same Alias key are allowed. Different Alias keys may reference the same item key. Aliases can be used in HostMetadataItem but not in HostnameItem parameters. Examples: 1. Retrieving the ID of user 'zabbix'. Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,"^zabbix:.:([0-9]+)",,,,\1] Now shorthand key zabbix.userid may be used to retrieve data. 2. Getting CPU utilization with default and custom parameters. Alias=cpu.util:system.cpu.util Alias=cpu.util[*]:system.cpu.util[*] This allows use cpu.util key to get CPU utilization percentage with default parameters as well as use cpu.util[all, idle, avg15] to get specific data about CPU utilization. 3. Running multiple low-level discovery rules processing the same discovery items. Alias=vfs.fs.discovery[*]:vfs.fs.discovery Now it is possible to set up several discovery rules using vfs.fs.discovery with different parameters for each rule, e.g., vfs.fs.discovery[foo], vfs.fs.discovery[bar], etc. |
|||
| AllowKey | no | Allow execution of those item keys that match a pattern. Key pattern is a wildcard expression that supports "*" character to match any number of any characters. Multiple key matching rules may be defined in combination with DenyKey. The parameters are processed one by one according to their appearance order. This parameter is supported since Zabbix 5.0.0. See also: Restricting agent checks. |
|||
| BufferSend | no | 1-3600 | 5 | The time interval in seconds which determines how often values are sent from the buffer to Zabbix server. Note, that if the buffer is full, the data will be sent sooner. |
|
| BufferSize | no | 2-65535 | 100 | Maximum number of values in a memory buffer. The agent will send all collected data to Zabbix server or proxy if the buffer is full. This parameter should only be used if persistent buffer is disabled (EnablePersistentBuffer=0). |
|
| ControlSocket | no | /tmp/agent.sock | The control socket, used to send runtime commands with '-R' option. | ||
| DebugLevel | no | 0-5 | 3 | Specifies debug level: 0 - basic information about starting and stopping of Zabbix processes 1 - critical information 2 - error information 3 - warnings 4 - for debugging (produces lots of information) 5 - extended debugging (produces even more information) |
|
| DenyKey | no | Deny execution of those item keys that match a pattern. Key pattern is a wildcard expression that supports "*" character to match any number of any characters. Multiple key matching rules may be defined in combination with AllowKey. The parameters are processed one by one according to their appearance order. This parameter is supported since Zabbix 5.0.0. See also: Restricting agent checks. |
|||
| EnablePersistentBuffer | no | 0-1 | 0 | Enable usage of local persistent storage for active items. 0 - disabled 1 - enabled If persistent storage is disabled, the memory buffer will be used. |
|
| HostInterface | no | 0-255 characters | Optional parameter that defines host interface. Host interface is used at host autoregistration process. An agent will issue an error and not start if the value is over the limit of 255 characters. If not defined, value will be acquired from HostInterfaceItem. Supported since Zabbix 4.4.0. |
||
| HostInterfaceItem | no | Optional parameter that defines an item used for getting host interface. Host interface is used at host autoregistration process. During an autoregistration request an agent will log a warning message if the value returned by specified item is over limit of 255 characters. This option is only used when HostInterface is not defined. Supported since Zabbix 4.4.0. |
|||
| HostMetadata | no | 0-255 characters | Optional parameter that defines host metadata. Host metadata is used at host autoregistration process. An agent will issue an error and not start if the specified value is over the limit or a non-UTF-8 string. If not defined, the value will be acquired from HostMetadataItem. |
||
| HostMetadataItem | no | Optional parameter that defines an item used for getting host metadata. Host metadata item value is retrieved on each autoregistration attempt for host autoregistration process. During an autoregistration request an agent will log a warning message if the value returned by the specified item is over the limit of 255 characters. This option is only used when HostMetadata is not defined. Supports UserParameters and aliases. Supports system.run[] regardless of AllowKey/DenyKey values. The value returned by the item must be a UTF-8 string otherwise it will be ignored. |
|||
| Hostname | no | Set by HostnameItem | List of comma-delimited unique, case-sensitive hostnames. Required for active checks and must match hostnames as configured on the server. Value is acquired from HostnameItem if undefined. Allowed characters: alphanumeric, '.', ' ', '_' and '-'. Maximum length: 128 characters per hostname, 2048 characters for the entire line. |
||
| HostnameItem | no | system.hostname | Item used for generating Hostname if it is not defined. Ignored if Hostname is defined. Does not support UserParameters or aliases, but does support system.run[] regardless of AllowKey/DenyKey values. The output length is limited to 512KB. |
||
| Include | no | You may include individual files or all files in a directory in the configuration file. During installation Zabbix will create the include directory in /usr/local/etc, unless modified during the compile time. To only include relevant files in the specified directory, the asterisk wildcard character is supported for pattern matching. For example: /absolute/path/to/config/files/*.conf.See special notes about limitations. |
|||
| ListenIP | no | 0.0.0.0 | List of comma-delimited IP addresses that the agent should listen on. The first IP address is sent to Zabbix server, if connecting to it, to retrieve the list of active checks. |
||
| ListenPort | no | 1024-32767 | 10050 | Agent will listen on this port for connections from the server. | |
| LogFile | yes, if LogType is set to file, otherwise no |
/tmp/zabbix_agent2.log | Log file name if LogType is 'file'. | ||
| LogFileSize | no | 0-1024 | 1 | Maximum size of log file in MB. 0 - disable automatic log rotation. Note: If the log file size limit is reached and file rotation fails, for whatever reason, the existing log file is truncated and started anew. |
|
| LogType | no | file | Specifies where log messages are written to: system - syslog, file - file specified by LogFile parameter, console - standard output. |
||
| PersistentBufferFile | no | The file, where Zabbix Agent2 should keep SQLite database. Must be a full filename. This parameter is only used if persistent buffer is enabled (EnablePersistentBuffer=1). |
|||
| PersistentBufferPeriod | no | 1m-365d | 1h | The time period for which data should be stored, when there is no connection to the server or proxy. Older data will be lost. Log data will be preserved. This parameter is only used if persistent buffer is enabled (EnablePersistentBuffer=1). |
|
| PidFile | no | /tmp/zabbix_agent2.pid | Name of PID file. | ||
| Plugins | no | A plugin can have one or more plugin-specific configuration parameters in the format: Plugins.<PluginName>.<Parameter1>=<value1> Plugins.<PluginName>.<Parameter2>=<value2> |
|||
| Plugins.<PluginName>.KeepAlive | no | 60-900 | 300 | The maximum time of waiting (in seconds) before unused plugin connections are closed. Supported for the following plugins: Ceph, Memcached, MongoDB, MySQL, Oracle, Redis, PostgreSQL. <PluginName> - name of the plugin. Example: Plugins.Memcached.KeepAlive=200 |
|
| Plugins.<PluginName>.Timeout | no | 1-30 | global timeout | Request execution timeout (how long to wait for a request to complete before shutting it down). Supported for the following plugins: Docker, Memcached, Modbus, MongoDB, MQTT, MySQL, Redis, PostgreSQL, Smart, WebCertificate. |
|
| Plugins.Ceph.InsecureSkipVerify | no | false / true | false | Determines whether an http client should verify the server's certificate chain and host name. If true, TLS accepts any certificate presented by the server and any host name in that certificate. In this mode, TLS is susceptible to man-in-the-middle attacks (should be used only for testing). |
|
| Plugins.Docker.Endpoint | no | unix:///var/run/docker.sock | Docker daemon unix-socket location. Must contain a scheme (only unix:// is supported). |
||
| Plugins.Log.MaxLinesPerSecond | no | 1-1000 | 20 | Maximum number of new lines the agent will send per second to Zabbix server or proxy when processing 'log' and 'eventlog' active checks. The provided value will be overridden by the parameter 'maxlines', provided in 'log' or 'eventlog' item key. Note: Zabbix will process 10 times more new lines than set in MaxLinesPerSecond to seek the required string in log items. This parameter is supported since 4.4.2 and replaces MaxLinesPerSecond. |
|
| Plugins.Oracle.CallTimeout | no | 1-30 | global timeout | The maximum wait time in seconds for a request to be completed. | |
| Plugins.Oracle.ConnectTimeout | no | 1-30 | global timeout | The maximum wait time in seconds for a connection to be established. | |
| Plugins.Oracle.CustomQueriesPath | no | Full pathname of a directory containing .sql files with custom queries. Disabled by default. Example: /etc/zabbix/oracle/sql |
|||
| Plugins.Oracle.Service | no | XE | A service name to be used for connection (SID is not supported). | ||
| Plugins.Postgres.Host | no | localhost | IP address or DNS name of the host used for PostgreSQL. Examples: localhost, 192.168.1.1 |
||
| Plugins.Postgres.Port | no | 5432 | A port to be used for PostgreSQL. | ||
| Plugins.Smart.Path | no | smartctl | Path to the smartctl executable. | ||
| Plugins.SystemRun.LogRemoteCommands | no | 0 | Enable logging of executed shell commands as warnings. 0 - disabled 1 - enabled Commands will be logged only if executed remotely. Log entries will not be created if system.run[] is launched locally by HostMetadataItem, HostInterfaceItem or HostnameItem parameters. This parameter is supported since 4.4.2 and replaces LogRemoteCommands. |
||
| Plugins' named sessions | no | If Zabbix agent is used to monitor several instances of the same kind, you can create a named session with own set of authorization parameters for each instance. Named session parameters format: Plugins.<PluginName>.<SessionName1>.<Parameter1>=<value1> Plugins.<PluginName>.<SessionName2>.<Parameter1>=<value2> |
|||
| Plugins.<PluginName>.Sessions.<SessionName>.Password | no | Named session password. Supported for: Memcached, MongoDB, MySQL, Oracle, PostgreSQL, Redis. <PluginName> - name of the plugin. <SessionName> - name of a session for using in item keys. |
|||
| Plugins.<PluginName>.Sessions.<SessionName>.TLSCAFile | no | Full pathname of a file containing the top-level CA(s) certificates for peer certificate verification, used for encrypted communications between Zabbix agent 2 and monitored databases. Supported for: MySQL, PostgreSQL. <PluginName> - name of the plugin. <SessionName> - name of a session for using in item keys. |
|||
| Plugins.<PluginName>.Sessions.<SessionName>.TLSCertFile | no | Full pathname of a file containing the agent certificate or certificate chain, used for encrypted communications between Zabbix agent 2 and monitored databases. Supported for: MySQL, PostgreSQL. <PluginName> - name of the plugin. <SessionName> - name of a session for using in item keys. |
|||
| Plugins.<PluginName>.Sessions.<SessionName>.TLSConnect | no | Encryption type for communications between Zabbix agent 2 and monitored databases. Supported for: MySQL, PostgreSQL. <PluginName> - name of the plugin. <SessionName> - name of a session for using in item keys. Accepted values: required - require TLS connection; verify_ca - verify certificates; verify_full - verify certificates and IP address. |
|||
| Plugins.<PluginName>.Sessions.<SessionName>.TLSKeyFile | no | Full pathname of a file containing the database private key used for encrypted communications between Zabbix agent 2 and monitored databases. Supported for: MySQL, PostgreSQL. <PluginName> - name of the plugin. <SessionName> - name of a session for using in item keys. |
|||
| Plugins.<PluginName>.Sessions.<SessionName>.User | no | Named session username. Supported for: Ceph, Memcached, MongoDB, MySQL, Oracle, PostgreSQL. <PluginName> - name of the plugin. <SessionName> - name of a session for using in item keys. |
|||
| Plugins.Ceph.Sessions.<SessionName>.ApiKey | no | Named session API key. Supported for: Ceph. <PluginName> - name of the plugin. <SessionName> - name of a session for using in item keys. |
|||
| Plugins.Ceph.Sessions.<SessionName>.Uri | no | https://localhost:8003 | Connection string of a named session. <SessionName> - name of a session for using in item keys. Should not include embedded credentials (they will be ignored). Must match the URI format. Only https scheme is supported; a scheme can be omitted (since version 5.2.3).A port can be omitted (default=8003). Examples: https://127.0.0.1:8003localhost |
||
| Plugins.Memcached.Sessions.<SessionName>.Uri | no | tcp://localhost:11211 | Connection string of a named session. <SessionName> - name of a session for using in item keys. Should not include embedded credentials (they will be ignored). Must match the URI format. Supported schemes: tcp, unix; a scheme can be omitted (since version 5.2.3).A port can be omitted (default=11211). Examples: tcp://localhost:11211localhostunix:/var/run/memcached.sock |
||
| Plugins.Modbus.Sessions.<SessionName>.Endpoint | no | Endpoint of a named session. Supported for: Modbus. <SessionName> - name of a session for using in item keys. Example: Plugins.Modbus.Sessions.MB1.Endpoint=tcp://127.0.0.1:502Note that this named session parameter is checked only if the value provided in the item key endpoint parameter is empty. |
|||
| Plugins.Modbus.Sessions.<SessionName>.SlaveID | no | Slave ID of a named session. Supported for: Modbus. <SessionName> - name of a session for using in item keys. Example: Plugins.Modbus.Sessions.MB1.SlaveID=20Note that this named session parameter is checked only if the value provided in the item key slave ID parameter is empty. |
|||
| Plugins.Modbus.Sessions.<SessionName>.Timeout | no | Timeout of a named session. Supported for: Modbus. <SessionName> - name of a session for using in item keys. Example: Plugins.Modbus.Sessions.MB1.Timeout=2 |
|||
| Plugins.Mongo.Sessions.<SessionName>.Uri | no | Connection string of a named session. <SessionName> - name of a session for using in item keys. Should not include embedded credentials (they will be ignored). Must match the URI format. Only tcp scheme is supported; a scheme can be omitted.A port can be omitted (default=27017). Examples: tcp://127.0.0.1:27017, tcp:localhost, localhost |
|||
| Plugins.Mysql.Sessions.<SessionName>.Uri | no | tcp://localhost:3306 | Connection string of a named session. <SessionName> - name of a session for using in item keys. Should not include embedded credentials (they will be ignored). Must match the URI format. Supported schemes: tcp, unix; a scheme can be omitted (since version 5.2.3).A port can be omitted (default=3306). Examples: tcp://localhost:3306localhostunix:/var/run/mysql.sock |
||
| Plugins.Oracle.Sessions.<SessionName>.Service | no | Named session service name to be used for connection (SID is not supported). Supported for: Oracle. <PluginName> - name of the plugin. <SessionName> -name of a session for using in item keys. |
|||
| Plugins.Oracle.Sessions.<SessionName>.Uri | no | tcp://localhost:1521 | Named session connection string for Oracle. <SessionName> - name of a session for using in item keys. Should not include embedded credentials (they will be ignored). Must match the URI format. Only tcp scheme is supported; a scheme can be omitted (since version 5.2.3).A port can be omitted (default=1521). Examples: tcp://127.0.0.1:1521localhost |
||
| Plugins.Postgres.Sessions.<SessionName>.Database | no | postgres | Database name of a named session. <SessionName> - name of a session for using in item keys. |
||
| Plugins.Redis.Sessions.<SessionName>.Uri | no | tcp://localhost:6379 | Connection string of a named session. <SessionName> - name of a session for using in item keys. Should not include embedded credentials (they will be ignored). Must match the URI format. Supported schemes: tcp, unix; a scheme can be omitted (since version 5.2.3).A port can be omitted (default=6379). Examples: tcp://localhost:6379localhostunix:/var/run/redis.sock |
||
| RefreshActiveChecks | no | 60-3600 | 120 | How often the list of active checks is refreshed, in seconds. Note that after failing to refresh active checks the next refresh will be attempted after 60 seconds. |
|
| Server | yes | List of comma-delimited IP addresses, optionally in CIDR notation, or DNS names of Zabbix servers and Zabbix proxies. Incoming connections will be accepted only from the hosts listed here. If IPv6 support is enabled then '127.0.0.1', '::ffff:127.0.0.1' are treated equally and '::/0' will allow any IPv4 or IPv6 address. '0.0.0.0/0' can be used to allow any IPv4 address. Example: Server=127.0.0.1,192.168.1.0/24,::1,2001:db8::/32,zabbix.example.com Spaces are allowed. |
|||
| ServerActive | no | List of comma-delimited IP:port (or DNS name:port) pairs of Zabbix servers and Zabbix proxies for active checks. Multiple addresses can be provided to use several independent Zabbix servers in parallel. Spaces are allowed. If port is not specified, default port is used. IPv6 addresses must be enclosed in square brackets if port for that host is specified. If port is not specified, square brackets for IPv6 addresses are optional. If this parameter is not specified, active checks are disabled. Example: ServerActive=127.0.0.1:20051,zabbix.example.com,[::1]:30051,::1,[12fc::1] |
|||
| SourceIP | no | Source IP address for: - outgoing connections to Zabbix server or Zabbix proxy; - making connections while executing some items (web.page.get, net.tcp.port, etc.) |
|||
| StatusPort | no | 1024-32767 | If set, agent will listen on this port for HTTP status requests (http://localhost:<port>/status). | ||
| Timeout | no | 1-30 | 3 | Spend no more than Timeout seconds on processing. | |
| TLSAccept | yes, if TLS certificate or PSK parameters are defined (even for unencrypted connection), otherwise no | What incoming connections to accept. Used for a passive checks. Multiple values can be specified, separated by comma: unencrypted - accept connections without encryption (default) psk - accept connections with TLS and a pre-shared key (PSK) cert - accept connections with TLS and a certificate |
|||
| TLSCAFile | no | Full pathname of a file containing the top-level CA(s) certificates for peer certificate verification, used for encrypted communications between Zabbix components. | |||
| TLSCertFile | no | Full pathname of a file containing the agent certificate or certificate chain, used for encrypted communications with Zabbix components. | |||
| TLSConnect | yes, if TLS certificate or PSK parameters are defined (even for unencrypted connection), otherwise no | How the agent should connect to Zabbix server or proxy. Used for active checks. Only one value can be specified: unencrypted - connect without encryption (default) psk - connect using TLS and a pre-shared key (PSK) cert - connect using TLS and a certificate |
|||
| TLSCRLFile | no | Full pathname of a file containing revoked certificates. This parameter is used for encrypted communications with Zabbix components. | |||
| TLSKeyFile | no | Full pathname of a file containing the agent private key used for encrypted communications with Zabbix components. | |||
| TLSPSKFile | no | Full pathname of a file containing the agent pre-shared key used for encrypted communications with Zabbix components. | |||
| TLSPSKIdentity | no | Pre-shared key identity string, used for encrypted communications with Zabbix server. | |||
| TLSServerCertIssuer | no | Allowed server (proxy) certificate issuer. | |||
| TLSServerCertSubject | no | Allowed server (proxy) certificate subject. | |||
| UnsafeUserParameters | no | 0,1 | 0 | Allow all characters to be passed in arguments to user-defined parameters. The following characters are not allowed: \ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @ Additionally, newline characters are not allowed. |
|
| UserParameter | no | User-defined parameter to monitor. There can be several user-defined parameters. Format: UserParameter=<key>,<shell command> Note that shell command must not return empty string or EOL only. Shell commands may have relative paths, if UserParameterDir parameter is specified. Examples: UserParameter=system.test,who|wc -l UserParameter=check_cpu,./custom_script.sh |
|||
| UserParameterDir | no | Default search path for UserParameter commands. If used, the agent will change its working directory to the one specified here before executing a command. Thereby, UserParameter commands can have a relative ./ prefix instead of a full path.Only one entry is allowed. Example: UserParameterDir=/opt/myscripts |
|||