This is a translation of the original English documentation page. Help us make it better.

1 Wykrywanie sieci

Overview

Zabbix offers automatic network discovery functionality that is effective and very flexible.

With network discovery properly set up you can:

  • speed up Zabbix deployment
  • simplify administration
  • use Zabbix in rapidly changing environments without excessive administration

Zabbix network discovery is based on the following information:

  • IP ranges
  • Availability of external services (FTP, SSH, WEB, POP3, IMAP, TCP, etc)
  • Information received from Zabbix agent (only unencrypted mode is supported)
  • Information received from SNMP agent

It does NOT provide:

  • Discovery of network topology

Network discovery basically consists of two phases: discovery and actions.

Discovery

Zabbix periodically scans the IP ranges defined in network discovery rules. The frequency of the check is configurable for each rule individually.

Note that one discovery rule will always be processed by a single discoverer process. The IP range will not be split between multiple discoverer processes.

Each rule has a set of service checks defined to be performed for the IP range.

Discovery checks are processed independently from the other checks. If any checks do not find a service (or fail), other checks will still be processed.

Every check of a service and a host (IP) performed by the network discovery module generates a discovery event.

Event Check of service result
Service Discovered The service is 'up' after it was 'down' or when discovered for the first time.
Service Up The service is 'up', after it was already 'up'.
Service Lost The service is 'down' after it was 'up'.
Service Down The service is 'down', after it was already 'down'.
Host Discovered At least one service of a host is 'up' after all services of that host were 'down' or a service is discovered which belongs to a not registered host.
Host Up At least one service of a host is 'up', after at least one service was already 'up'.
Host Lost All services of a host are 'down' after at least one was 'up'.
Host Down All services of a host are 'down', after they were already 'down'.

Actions

Discovery events can be the basis of relevant actions, such as:

  • Sending notifications
  • Adding/removing hosts
  • Enabling/disabling hosts
  • Adding hosts to a group
  • Removing hosts from a group
  • Linking hosts to/unlinking from a template
  • Executing remote scripts

These actions can be configured with respect to the device type, IP, status, uptime/downtime, etc. For full details on configuring actions for network-discovery based events, see action operation and conditions pages.

Linking a discovered host to templates will fail collectively if any of the linkable templates has a unique entity (e.g. item key) that is the same as a unique entity (e.g. item key) already existing on the host or on another of the linkable templates.

Host creation

A host is added if the Add host operation is selected. A host is also added, even if the Add host operation is missing, if you select operations resulting in actions on a host. Such operations are:

  • enable host
  • disable host
  • add host to a host group
  • link template to a host

Created hosts are added to the Discovered hosts group (by default, configurable in AdministrationGeneralOther). If you wish hosts to be added to another group, add a Remove from host groups operation (specifying "Discovered hosts") and also add an Add to host groups operation (specifying another host group), because a host must belong to a host group.

Host naming

When adding hosts, a host name is the result of reverse DNS lookup or IP address if reverse lookup fails. Lookup is performed from the Zabbix server or Zabbix proxy, depending on which is doing the discovery. If lookup fails on the proxy, it is not retried on the server. If the host with such a name already exists, the next host would get _2 appended to the name, then _3 and so on.

It is also possible to override DNS/IP lookup and instead use an item value for host name, for example:

  • You may discover multiple servers with Zabbix agent running using a Zabbix agent item for discovery and assign proper names to them automatically, based on the string value returned by this item
  • You may discover multiple SNMP network devices using an SNMP agent item for discovery and assign proper names to them automatically, based on the string value returned by this item

If the host name has been set using an item value, it is not updated during the following discovery checks. If it is not possible to set host name using an item value, default value (DNS name) is used.

If a host already exists with the discovered IP address, a new host is not created. However, if the discovery action contains operations (link template, add to host group, etc), they are performed on the existing host.

Host removal

Hosts discovered by a network discovery rule are removed automatically from MonitoringDiscovery if a discovered entity is not in the rule's IP range any more. Hosts are removed immediately.

Interface creation when adding hosts

When hosts are added as a result of network discovery, they get interfaces created according to these rules:

  • the services detected - for example, if an SNMP check succeeded, an SNMP interface will be created
  • if a host responded both to Zabbix agent and SNMP requests, both types of interfaces will be created
  • if uniqueness criteria are Zabbix agent or SNMP-returned data, the first interface found for a host will be created as the default one. Other IP addresses will be added as additional interfaces.
  • if a host responded to agent checks only, it will be created with an agent interface only. If it would start responding to SNMP later, additional SNMP interfaces would be added.
  • if 3 separate hosts were initially created, having been discovered by the "IP" uniqueness criteria, and then the discovery rule is modified so that hosts A, B and C have identical uniqueness criteria result, B and C are created as additional interfaces for A, the first host. The individual hosts B and C remain. In Monitoring → Discovery the added interfaces will be displayed in the "Discovered device" column, in black font and indented, but the "Monitored host" column will only display A, the first created host. "Uptime/Downtime" is not measured for IPs that are considered to be additional interfaces.

Changing proxy setting

The hosts discovered by different proxies are always treated as different hosts. While this allows to perform discovery on matching IP ranges used by different subnets, changing proxy for an already monitored subnet is complicated because the proxy changes must be also applied to all discovered hosts.

For example the steps to replace proxy in a discovery rule:

  1. disable discovery rule
  2. sync proxy configuration
  3. replace the proxy in the discovery rule
  4. replace the proxy for all hosts discovered by this rule
  5. enable discovery rule