Documentation
Table of Contents
4 Длина заголовка и данных
Overview
The header is present in response and request messages between Zabbix components. It is required to determine the length of message, if it is compressed or not and the format of message length fields. The header consists of:
<PROTOCOL> - "ZBXD" (4 bytes).
<FLAGS> - the protocol flags, (1 byte). 0x01 - Zabbix communications protocol, 0x02 - compression, 0x04 - large packet).
<DATALEN> - data length (4 bytes or 8 bytes for large packet). 1 will be formatted as 01/00/00/00 (four bytes, 32 bit number in little-endian format) or 01/00/00/00/00/00/00/00 (eight bytes, 64 bit number in little-endian format) for large packet.
<RESERVED> - uncompressed data length (4 bytes or 8 bytes for large packet). 1 will be formatted as 01/00/00/00 (four bytes, 32 bit number in little-endian format) or 01/00/00/00/00/00/00/00 (eight bytes, 64 bit number in little-endian format) for large packet.When compression is enabled (0x02 flag) the <RESERVED> bytes contains uncompressed data size. When compression is not enabled then <RESERVED> should be zeroes.
Zabbix protocol has 1GB packet size limit per connection. The limit of 1GB is applied for received packet data length and for uncompressed data length, however, when large packet is enabled (0x04 flag) it is possible for Zabbix proxy to receive configuration with size up to 16GB; note that large packet can only be used for Zabbix proxy configuration, and Zabbix server will automatically set (0x04 flag) and send length fields as 8 bytes each when data length before compression exceeds 4GB.
Structure
The header consists of four fields. All numbers in the header are formatted as little-endian.
| Field | Size | Size (large packet) |
Description |
|---|---|---|---|
<PROTOCOL> |
4 | 4 | "ZBXD" or 5A 42 58 44 |
<FLAGS> |
1 | 1 | Protocol flags:0x01 - Zabbix communications protocol0x02 - compression0x04 - large packet |
<DATALEN> |
4 | 8 | Data length. |
<RESERVED> |
4 | 8 | When compression is used (0x02 flag) - the length of uncompressed dataWhen compression is not used - 00 00 00 00 |
Реализация
Здесь представлены выдержки кода, которые показывают как добавить заголовок Zabbix протокола к data, которые вы хотите отправить, чтобы получить packet вам необходимо отправлять на Zabbix, так чтобы он интерпретировался корректным образом.
| Язык | Код |
|---|---|
| bash | printf -v LENGTH '%016x' "${#DATA}"PACK=""for i in {14..0..-2}; do PACK="$PACK\\x${LENGTH:$i:2}"; doneprintf "ZBXD\1$PACK%s" $DATA |
| Java | byte[] header = new byte[] {'Z', 'B', 'X', 'D', '\1',(byte)(data.length & 0xFF),(byte)((data.length >> 8) & 0xFF),(byte)((data.length >> 16) & 0xFF),(byte)((data.length >> 24) & 0xFF),'\0', '\0', '\0', '\0'};| |<|byte[] packet = new byte[header.length + data.length];System.arraycopy(header, 0, packet, 0, header.length);System.arraycopy(data, 0, packet, header.length, data.length); |
| PHP | $packet = "ZBXD\1" . pack('P', strlen($data)) . $data; или $packet = "ZBXD\1" . pack('V', strlen($data)) . "\0\0\0\0" . $data; |
| Perl | my $packet = "ZBXD\1" . pack('<Q', length($data)) . $data;илиmy $packet = "ZBXD\1" . pack('V', length($data)) . "\0\0\0\0" . $data; |
| Python | packet = "ZBXD\1" + struct.pack('<Q', len(data)) + data |