Documentation
Table of Contents
27 Toptriggers
Beschrijving
Deze parameters en de mogelijke eigenschapswaarden voor de respectievelijke dashboardwidgetveldobjecten maken het mogelijk om de widget Top triggers te configureren in de methoden dashboard.create en dashboard.update.
Widget fields-eigenschappen worden niet gevalideerd tijdens het maken of bijwerken van een dashboard. Hierdoor kunnen gebruikers ingebouwde widgets wijzigen en aangepaste widgets maken, maar dit brengt ook het risico met zich mee dat widgets onjuist worden gemaakt of bijgewerkt. Om de succesvolle creatie of update van de widget Top triggers te garanderen, raadpleegt u het parametergedrag dat in de onderstaande tabellen wordt beschreven.
Parameters
The following parameters are supported for the Top triggers widget.
| Parameter | type | name | value | |
|---|---|---|---|---|
| Refresh interval | 0 | rf_rate | 0 - (default) No refresh; 10 - 10 seconds; 30 - 30 seconds; 60 - 1 minute; 120 - 2 minutes; 600 - 10 minutes; 900 - 15 minutes. |
|
| Host groups | 2 | groupids.0 | Host group ID. Note: To configure multiple host groups, create a dashboard widget field object for each host group with an incremented number in the property name. This parameter is not supported if configuring the widget on a template dashboard. |
|
| Hosts | 3 | hostids.0 | Host ID. Note: To configure multiple hosts, create a dashboard widget field object for each host with an incremented number in the property name. For multiple hosts, the parameter Host groups must either be not configured at all or configured with at least one host group that the configured hosts belong to. This parameter is not supported if configuring the widget on a template dashboard. |
|
| Problem | 1 | problem | Problem event name (case insensitive, full name or part of it). | |
| Severity | 0 | severities.0 | Trigger severities. 0 - Not classified; 1 - Information; 2 - Warning; 3 - Average; 4 - High; 5 - Disaster. Default: empty (all enabled). Note: To configure multiple values, create a dashboard widget field object for each value with an incremented number in the property name. |
|
| Problem tags | ||||
| Evaluation type | 0 | evaltype | 0 - (default) And/Or; 2 - Or. |
|
| Tag name | 1 | tags.0.tag | Any string value. Note: The number in the property name references tag order in the tag evaluation list. Parameter behavior: - required if configuring Problem tags |
|
| Operator | 0 | tags.0.operator | 0 - Contains; 1 - Equals; 2 - Does not contain; 3 - Does not equal; 4 - Exists; 5 - Does not exist. Note: The number in the property name references tag order in the tag evaluation list. Parameter behavior: - required if configuring Problem tags |
|
| Tag value | 1 | tags.0.value | Any string value. Note: The number in the property name references tag order in the tag evaluation list. Parameter behavior: - required if configuring Problem tags |
|
| Time period | 1 | time_period._reference | DASHBOARD._timeperiod - set the Time period selector as the data source;ABCDE._timeperiod - set a compatible widget (with its Reference parameter set to "ABCDE") as the data source.Default: DASHBOARD._timeperiodAlternatively, you can set the time period only in the From and To parameters. |
|
| From | 1 | time_period.from | Valid time string in absolute (YYYY-MM-DD hh:mm:ss) or relative time syntax (now, now/d, now/w-1w, etc.).Parameter behavior: - supported if Time period is not set |
|
| To | 1 | time_period.to | Valid time string in absolute (YYYY-MM-DD hh:mm:ss) or relative time syntax (now, now/d, now/w-1w, etc.).Parameter behavior: - supported if Time period is not set |
|
| Trigger limit | 0 | show_lines | Possible values range from 1-100. Default: 10. |
|
Voorbeelden
De volgende voorbeelden zijn bedoeld om alleen de configuratie van de dashboardwidgetveldobjecten voor de widget Top triggers te beschrijven. Voor meer informatie over het configureren van een dashboard, zie dashboard.create.
Configuring a Top triggers widget
Configure a Top triggers widget that displays the top 5 triggers for host group "4" with the count of all problems for each trigger. The widget displays only triggers that have severities "Warning", "Average", "High", or "Disaster", and problems that have a tag with the name "scope" that contains values "performance" or "availability", or "capacity".
{
"jsonrpc": "2.0",
"method": "dashboard.create",
"params": {
"name": "My dashboard",
"display_period": 30,
"auto_start": 1,
"pages": [
{
"widgets": [
{
"type": "toptriggers",
"name": "Top triggers",
"x": 0,
"y": 0,
"width": 36,
"height": 5,
"view_mode": 0,
"fields": [
{
"type": 2,
"name": "groupids.0",
"value": 4
},
{
"type": 0,
"name": "severities.0",
"value": 2
},
{
"type": 0,
"name": "severities.1",
"value": 3
},
{
"type": 0,
"name": "severities.2",
"value": 4
},
{
"type": 0,
"name": "severities.3",
"value": 5
},
{
"type": 1,
"name": "tags.0.tag",
"value": "scope"
},
{
"type": 0,
"name": "tags.0.operator",
"value": 0
},
{
"type": 1,
"name": "tags.0.value",
"value": "performance"
},
{
"type": 1,
"name": "tags.1.tag",
"value": "scope"
},
{
"type": 0,
"name": "tags.1.operator",
"value": 0
},
{
"type": 1,
"name": "tags.1.value",
"value": "availability"
},
{
"type": 1,
"name": "tags.2.tag",
"value": "scope"
},
{
"type": 0,
"name": "tags.2.operator",
"value": 0
},
{
"type": 1,
"name": "tags.2.value",
"value": "capacity"
},
{
"type": 0,
"name": "show_lines",
"value": 5
}
]
}
]
}
],
"userGroups": [
{
"usrgrpid": 7,
"permission": 2
}
],
"users": [
{
"userid": 1,
"permission": 3
}
]
},
"id": 1
}Response: