Netapp

Netapp

NetApp offers hybrid cloud data services for management of applications and data across cloud and on-premises environments.

Dostupná řešení




This template is for Zabbix version: 7.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/san/netapp_fas3220_snmp?at=release/7.0

NetApp FAS3220 by SNMP

Overview

The template to monitor SAN NetApp FAS3220 cluster by Zabbix SNMP agent.

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

  • NetApp FAS3220, firmware version: 5.3.0

Configuration

Zabbix should be configured according to the instructions in the Templates out of the box section.

Setup

  1. Create a host for FAS3220 with cluster management IP as SNMPv2 interface.

  2. Link the template to the host.

  3. Customize macro values if needed.

Macros used

Name Description Default
{$IF.UTIL.MAX} 95
{$IF.ERRORS.WARN}
{$CPU.UTIL.CRIT}

The critical threshold of the CPU utilization expressed in %.

 90
{$FAS3220.FS.NAME.MATCHES}

This macro is used in filesystems discovery. Can be overridden on the host or linked template level.

 .*
{$FAS3220.FS.NAME.NOT_MATCHES}

This macro is used in filesystems discovery. Can be overridden on the host or linked template level.

 snapshot
{$FAS3220.FS.TYPE.MATCHES}

This macro is used in filesystems discovery. Can be overridden on the host or linked template level.

Value should be integer:

2 - flexibleVolume,

3 - aggregate,

4 - stripedAggregate,

5 - stripedVolume.

 .*
{$FAS3220.FS.TYPE.NOT_MATCHES}

This macro is used in filesystems discovery. Can be overridden on the host or linked template level.

Value should be integer:

2 - flexibleVolume,

3 - aggregate,

4 - stripedAggregate,

5 - stripedVolume.

 CHANGE_IF_NEEDED
{$FAS3220.NET.PORT.TYPE.MATCHES}

This macro is used in net ports discovery. Can be overridden on the host or linked template level.

{#TYPE} is integer. Possible values: physical, if-group, vlan, undef.

 .*
{$FAS3220.NET.PORT.TYPE.NOT_MATCHES}

This macro is used in net ports discovery. Can be overridden on the host or linked template level.

{#TYPE} is integer. Possible values: physical, if-group, vlan, undef.

 CHANGE_IF_NEEDED
{$FAS3220.NET.PORT.ROLE.MATCHES}

This macro is used in net ports discovery. Can be overridden on the host or linked template level.

{#ROLE} is integer. Possible values:

0 - undef

1 - cluster

2 - data

3 - node-mgmt

4 - intercluster

5 - cluster-mgmt

 .*
{$FAS3220.NET.PORT.ROLE.NOT_MATCHES}

This macro is used in net ports discovery. Can be overridden on the host or linked template level.

{#ROLE} is integer. Possible values:

0 - undef

1 - cluster

2 - data

3 - node-mgmt

4 - intercluster

5 - cluster-mgmt

 CHANGE_IF_NEEDED
{$FAS3220.NET.PORT.NAME.MATCHES}

This macro is used in net ports discovery. Can be overridden on the host or linked template level.

 .*
{$FAS3220.NET.PORT.NAME.NOT_MATCHES}

This macro is used in net ports discovery. Can be overridden on the host or linked template level.

 CHANGE_IF_NEEDED
{$FAS3220.FS.PUSED.MAX.CRIT}

Maximum percentage of disk used. Can be used with {#FSNAME} as context.

 90
{$FAS3220.FS.AVAIL.MIN.CRIT}

Minimum available space on the disk. Can be used with {#FSNAME} as context.

 10G
{$FAS3220.FS.TIME}

The time during which disk usage may exceed the threshold. Can be used with {#FSNAME} as context.

 10m
{$FAS3220.FS.USE.PCT}

Macro define what threshold will be used for disk space trigger:

0 - use Bytes ({$FAS3220.FS.AVAIL.MIN.CRIT})

1 - use percents ({$FAS3220.FS.PUSED.MAX.CRIT})

Can be used with {#FSNAME} as context.

 1
{$SNMP.TIMEOUT}

Time interval for the SNMP availability trigger.

 5m
{$ICMP_LOSS_WARN}

Warning threshold of ICMP packet loss in %.

 20
{$ICMP_RESPONSE_TIME_WARN}

Warning threshold of the average ICMP response time in seconds.

 0.15

Items

Name Description Type Key and additional info
Product version

MIB: NETAPP-MIB

Version string for the software running on this platform.

 SNMP agent fas3220.inventory[productVersion]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Product firmware version

Version string for the firmware running on this platform.

 SNMP agent fas3220.inventory[productFirmwareVersion]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Failed disks count

The number of disks that are currently broken.

 SNMP agent fas3220.disk[diskFailedCount]

Preprocessing

  • Discard unchanged with heartbeat: 10m
Failed disks message

If diskFailedCount is non-zero, this is a string describing the failed disk or disks. Each failed disk is described.

 SNMP agent fas3220.disk[diskFailedMessage]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Uptime (network)

MIB: SNMPv2-MIB

Time (in hundredths of a second) since the network management portion of the system was last re-initialized.

 SNMP agent system.net.uptime[sysUpTime.0]

Preprocessing

  • Custom multiplier: 0.01
Uptime (hardware)

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

 SNMP agent system.hw.uptime[hrSystemUptime.0]

Preprocessing

  • Check for not supported value: any error

    ⛔️Custom on fail: Set value to: 0

  • Custom multiplier: 0.01
SNMP traps (fallback)

The item is used to collect all SNMP traps unmatched by other snmptrap items

 SNMP trap snmptrap.fallback
System location

MIB: SNMPv2-MIB

Physical location of the node (e.g., equipment room, 3rd floor). If not provided, the value is a zero-length string.

 SNMP agent system.location[sysLocation.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
System contact details

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

 SNMP agent system.contact[sysContact.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
System object ID

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

 SNMP agent system.objectid[sysObjectID.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
System name

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

 SNMP agent system.name

Preprocessing

  • Discard unchanged with heartbeat: 12h
System description

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

 SNMP agent system.descr[sysDescr.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
SNMP agent availability

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible values:

0 - not available

1 - available

2 - unknown

 Zabbix internal zabbix[host,snmp,available]
ICMP ping Simple check icmpping
ICMP loss Simple check icmppingloss
ICMP response time Simple check icmppingsec

Triggers

Name Description Expression Severity Dependencies and additional info
Number of failed disks has changed

{{ITEM.LASTVALUE2}.regsub("(.*)", \1)}

 last(/NetApp FAS3220 by SNMP/fas3220.disk[diskFailedCount])>0 and last(/NetApp FAS3220 by SNMP/fas3220.disk[diskFailedMessage],#1)<>last(/NetApp FAS3220 by SNMP/fas3220.disk[diskFailedMessage],#2) Warning
Host has been restarted

Uptime is less than 10 minutes.

 (last(/NetApp FAS3220 by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/NetApp FAS3220 by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/NetApp FAS3220 by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/NetApp FAS3220 by SNMP/system.net.uptime[sysUpTime.0])<10m) Warning Manual close: Yes
Depends on:
  • No SNMP data collection
System name has changed

The name of the system has changed. Acknowledge to close the problem manually.

 last(/NetApp FAS3220 by SNMP/system.name,#1)<>last(/NetApp FAS3220 by SNMP/system.name,#2) and length(last(/NetApp FAS3220 by SNMP/system.name))>0 Info Manual close: Yes
No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

 max(/NetApp FAS3220 by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0 Warning Depends on:
  • Unavailable by ICMP ping
Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

 max(/NetApp FAS3220 by SNMP/icmpping,#3)=0 High
High ICMP ping loss min(/NetApp FAS3220 by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/NetApp FAS3220 by SNMP/icmppingloss,5m)<100 Warning Depends on:
  • Unavailable by ICMP ping
High ICMP ping response time

Average ICMP response time is too high.

 avg(/NetApp FAS3220 by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN} Warning Depends on:
  • High ICMP ping loss
  • Unavailable by ICMP ping

LLD rule CPU discovery

Name Description Type Key and additional info
CPU discovery

Discovery of CPU metrics per node

 SNMP agent fas3220.cpu.discovery

Item prototypes for CPU discovery

Name Description Type Key and additional info
Node {#NODE.NAME}: CPU utilization

The average, over the last minute, of the percentage of time that this processor was not idle.

 SNMP agent fas3220.cpu[cDOTCpuBusyTimePerCent, "{#NODE.NAME}"]

Trigger prototypes for CPU discovery

Name Description Expression Severity Dependencies and additional info
Node {#NODE.NAME}: High CPU utilization

The CPU utilization is too high. The system might be slow to respond.

 min(/NetApp FAS3220 by SNMP/fas3220.cpu[cDOTCpuBusyTimePerCent, "{#NODE.NAME}"],5m)>{$CPU.UTIL.CRIT} Warning

LLD rule Cluster metrics discovery

Name Description Type Key and additional info
Cluster metrics discovery

Discovery of Cluster metrics per node

 SNMP agent fas3220.cluster.discovery

Item prototypes for Cluster metrics discovery

Name Description Type Key and additional info
Node {#NODE.NAME}: Location

Node Location. Same as sysLocation for a specific node.

 SNMP agent fas3220.cluster[nodeLocation, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE.NAME}: Model

Node Model. Same as productModel for a specific node.

 SNMP agent fas3220.cluster[nodeModel, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE.NAME}: Serial number

Node Serial Number. Same as productSerialNum for a specific node.

 SNMP agent fas3220.cluster[nodeSerialNumber, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE.NAME}: Uptime

Node uptime. Same as sysUpTime for a specific node.

 SNMP agent fas3220.cluster[nodeUptime, "{#NODE.NAME}"]

Preprocessing

  • Custom multiplier: 0.01
Node {#NODE.NAME}: Health

Whether or not the node can communicate with the cluster.

 SNMP agent fas3220.cluster[nodeHealth, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE.NAME}: NVRAM battery status

An indication of the current status of the NVRAM battery or batteries.

Batteries which are fully or partially discharged may not fully protect the system during a crash. The end-of-life status values are based on the manufacturer's recommended life for the batteries.

Possible values:

ok(1),

partiallyDischarged(2),

fullyDischarged(3),

notPresent(4),

nearEndOfLife(5),

atEndOfLife(6),

unknown(7),

overCharged(8),

fullyCharged(9).

 SNMP agent fas3220.cluster[nodeNvramBatteryStatus, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE.NAME}: Over-temperature

An indication of whether the hardware is currently operating outside of its recommended temperature range. The hardware will shutdown if the temperature exceeds critical thresholds.

 SNMP agent fas3220.cluster[nodeEnvOverTemperature, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE.NAME}: Failed FAN count

Count of the number of chassis fans that are not operating within the recommended RPM range.

 SNMP agent fas3220.cluster[nodeEnvFailedFanCount, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE.NAME}: Failed FAN message

Text message describing current condition of chassis fans. This is useful only if envFailedFanCount is not zero.

 SNMP agent fas3220.cluster[nodeEnvFailedFanMessage, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE.NAME}: Degraded power supplies count

Count of the number of power supplies that are in degraded mode.

 SNMP agent fas3220.cluster[nodeEnvFailedPowerSupplyCount, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE.NAME}: Degraded power supplies message

Text message describing the state of any power supplies that are currently degraded. This is useful only if envFailedPowerSupplyCount is not zero.

 SNMP agent fas3220.cluster[nodeEnvFailedPowerSupplyMessage, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h

Trigger prototypes for Cluster metrics discovery

Name Description Expression Severity Dependencies and additional info
Node {#NODE.NAME}: Host has been restarted

Uptime is less than 10 minutes.

 last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeUptime, "{#NODE.NAME}"])<10m Info Manual close: Yes
Node {#NODE.NAME}: Node can not communicate with the cluster last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeHealth, "{#NODE.NAME}"])=0 High Manual close: Yes
Node {#NODE.NAME}: NVRAM battery status is not OK last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeNvramBatteryStatus, "{#NODE.NAME}"])<>1 Average Manual close: Yes
Node {#NODE.NAME}: Temperature is over than recommended

The hardware will shutdown if the temperature exceeds critical thresholds.

 last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvOverTemperature, "{#NODE.NAME}"])=2 High
Node {#NODE.NAME}: Failed FAN count is over than zero

{{ITEM.VALUE2}.regsub("(.*)", \1)}

 last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedFanCount, "{#NODE.NAME}"])>0 and last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedFanMessage, "{#NODE.NAME}"])=last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedFanMessage, "{#NODE.NAME}"]) High
Node {#NODE.NAME}: Degraded power supplies count is more than zero

{{ITEM.VALUE2}.regsub("(.*)", \1)}

 last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedPowerSupplyCount, "{#NODE.NAME}"])>0 and last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedPowerSupplyMessage, "{#NODE.NAME}"])=last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedPowerSupplyMessage, "{#NODE.NAME}"]) Average

LLD rule HA discovery

Name Description Type Key and additional info
HA discovery

Discovery of high availability metrics per node

 SNMP agent fas3220.ha.discovery

Item prototypes for HA discovery

Name Description Type Key and additional info
Node {#NODE.NAME}: Cannot takeover cause

The reason node cannot take over it's HA partner {#PARTNER.NAME}.

Possible states:

ok(1),

unknownReason(2),

disabledByOperator(3),

interconnectOffline(4),

disabledByPartner(5),

takeoverFailed(6),

mailboxIsInDegradedState(7),

partnermailboxIsInUninitialisedState(8),

mailboxVersionMismatch(9),

nvramSizeMismatch(10),

kernelVersionMismatch(11),

partnerIsInBootingStage(12),

diskshelfIsTooHot(13),

partnerIsPerformingRevert(14),

nodeIsPerformingRevert(15),

sametimePartnerIsAlsoTryingToTakeUsOver(16),

alreadyInTakenoverMode(17),

nvramLogUnsynchronized(18),

stateofBackupMailboxIsDoubtful(19).

 SNMP agent fas3220.ha[haCannotTakeoverCause, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE.NAME}: HA settings

High Availability configuration settings. The value notConfigured(1) indicates that the HA is not licensed. The thisNodeDead(5) setting indicates that this node has been takenover.

 SNMP agent fas3220.ha[haSettings, "{#NODE.NAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h

Trigger prototypes for HA discovery

Name Description Expression Severity Dependencies and additional info
Node {#NODE.NAME}: Node cannot takeover it's HA partner {#PARTNER.NAME}. Reason: {ITEM.VALUE}

Possible reasons:
unknownReason(2),
disabledByOperator(3),
interconnectOffline(4),
disabledByPartner(5),
takeoverFailed(6),
mailboxIsInDegradedState(7),
partnermailboxIsInUninitialisedState(8),
mailboxVersionMismatch(9),
nvramSizeMismatch(10),
kernelVersionMismatch(11),
partnerIsInBootingStage(12),
diskshelfIsTooHot(13),
partnerIsPerformingRevert(14),
nodeIsPerformingRevert(15),
sametimePartnerIsAlsoTryingToTakeUsOver(16),
alreadyInTakenoverMode(17),
nvramLogUnsynchronized(18),
stateofBackupMailboxIsDoubtful(19).

 last(/NetApp FAS3220 by SNMP/fas3220.ha[haCannotTakeoverCause, "{#NODE.NAME}"])<>1 High
Node {#NODE.NAME}: Node has been taken over

The thisNodeDead(5) setting indicates that this node has been takenover.

 last(/NetApp FAS3220 by SNMP/fas3220.ha[haSettings, "{#NODE.NAME}"])=5 High
Node {#NODE.NAME}: HA is not licensed

The value notConfigured(1) indicates that the HA is not licensed.

 last(/NetApp FAS3220 by SNMP/fas3220.ha[haSettings, "{#NODE.NAME}"])=1 Average

LLD rule Filesystems discovery

Name Description Type Key and additional info
Filesystems discovery

Filesystems discovery with filter.

 SNMP agent fas3220.fs.discovery

Item prototypes for Filesystems discovery

Name Description Type Key and additional info
{#VSERVER}{#FSNAME}: Total space used

The total disk space that is in use on {#FSNAME}.

 SNMP agent fas3220.fs[df64UsedKBytes, "{#VSERVER}{#FSNAME}"]

Preprocessing

  • Custom multiplier: 1024
{#VSERVER}{#FSNAME}: Total space available

The total disk space that is free for use on {#FSNAME}.

 SNMP agent fas3220.fs[df64AvailKBytes, "{#VSERVER}{#FSNAME}"]

Preprocessing

  • Custom multiplier: 1024
{#VSERVER}{#FSNAME}: Total space

The total capacity in bytes for {#FSNAME}.

 SNMP agent fas3220.fs[df64TotalKBytes, "{#VSERVER}{#FSNAME}"]

Preprocessing

  • Custom multiplier: 1024
{#VSERVER}{#FSNAME}: Used space percents

The percentage of disk space currently in use on {#FSNAME}.

 SNMP agent fas3220.fs[dfPerCentKBytesCapacity, "{#VSERVER}{#FSNAME}"]
{#VSERVER}{#FSNAME}: Saved by compression percents

Provides the percentage of compression savings in a volume, which is ((compr_saved/used)) * 10(compr_saved + 0). This is only returned for volumes.

 SNMP agent fas3220.fs[dfCompressSavedPercent, "{#VSERVER}{#FSNAME}"]
{#VSERVER}{#FSNAME}: Saved by deduplication percents

Provides the percentage of deduplication savings in a volume, which is ((dedup_saved/(dedup_saved + used)) * 100). This is only returned for volumes.

 SNMP agent fas3220.fs[dfDedupeSavedPercent, "{#VSERVER}{#FSNAME}"]

Trigger prototypes for Filesystems discovery

Name Description Expression Severity Dependencies and additional info
{#VSERVER}{#FSNAME}: Disk space is too low min(/NetApp FAS3220 by SNMP/fas3220.fs[df64AvailKBytes, "{#VSERVER}{#FSNAME}"],{$FAS3220.FS.TIME:"{#FSNAME}"})<{$FAS3220.FS.AVAIL.MIN.CRIT:"{#FSNAME}"} and {$FAS3220.FS.USE.PCT:"{#FSNAME}"}=0 High
{#VSERVER}{#FSNAME}: Disk space is too low max(/NetApp FAS3220 by SNMP/fas3220.fs[dfPerCentKBytesCapacity, "{#VSERVER}{#FSNAME}"],{$FAS3220.FS.TIME:"{#FSNAME}"})>{$FAS3220.FS.PUSED.MAX.CRIT:"{#FSNAME}"} and {$FAS3220.FS.USE.PCT:"{#FSNAME}"}=1 High

LLD rule Network ports discovery

Name Description Type Key and additional info
Network ports discovery

Network interfaces discovery with filter.

 SNMP agent fas3220.net.discovery

Preprocessing

  • JavaScript: The text is too long. Please see the template.

Item prototypes for Network ports discovery

Name Description Type Key and additional info
Node {#NODE}: port {#IFNAME} ({#TYPE}): Up by an administrator

Indicates whether the port status is set 'UP' by an administrator.

 SNMP agent fas3220.net.port[netportUpAdmin, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE}: port {#IFNAME} ({#TYPE}): Role

Role of the port. A port must have one of the following roles: cluster(1), data(2), mgmt(3), intercluster(4), cluster-mgmt(5) or undef(0). The cluster port is used to communicate to other node(s) in the cluster. The data port services clients' requests. It is where all the file requests come in. The management port is used by administrator to manage resources within a node. The intercluster port is used to communicate to other cluster. The cluster-mgmt port is used to manage resources within the cluster. The undef role is for the port that has not yet been assigned a role.

 SNMP agent fas3220.net.port[netportRole, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE}: port {#IFNAME} ({#TYPE}): Speed

The speed appears on the port. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5).

 SNMP agent fas3220.net.port[netportSpeedOper, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE}: port {#IFNAME} ({#TYPE}): Bits received

The total number of octets received on the interface, including framing characters.

 SNMP agent fas3220.net.if[if64InOctets, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Custom multiplier: 8

  • Change per second
Node {#NODE}: port {#IFNAME} ({#TYPE}): Bits sent

The total number of octets transmitted out of the interface, including framing characters.

 SNMP agent fas3220.net.if[if64OutOctets, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Custom multiplier: 8

  • Change per second
Node {#NODE}: port {#IFNAME} ({#TYPE}): Inbound packets with errors

MIB: IF-MIB

The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.

 SNMP agent fas3220.net.if[if64InErrors, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Change per second
Node {#NODE}: port {#IFNAME} ({#TYPE}): Outbound packets with errors

MIB: IF-MIB

The number of outbound packets that could not be transmitted because of errors.

 SNMP agent fas3220.net.if[if64OutErrors, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Change per second
Node {#NODE}: port {#IFNAME} ({#TYPE}): Inbound packets discarded

MIB: IF-MIB

The number of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.

 SNMP agent fas3220.net.if[if64InDiscards, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Change per second
Node {#NODE}: port {#IFNAME} ({#TYPE}): Outbound packets discarded

MIB: IF-MIB

The number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

 SNMP agent fas3220.net.if[if64OutDiscards, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Change per second
Node {#NODE}: port {#IFNAME} ({#TYPE}): State

The link-state of the port. Normally it is either UP(2) or DOWN(3).

 SNMP agent fas3220.net.port[netportLinkState, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE}: port {#IFNAME} ({#TYPE}): Health

The health status of the port.

 SNMP agent fas3220.net.port[netportHealthStatus, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h
Node {#NODE}: port {#IFNAME} ({#TYPE}): Health degraded reason

The list of reasons why the port is marked as degraded.

 SNMP agent fas3220.net.port[netportDegradedReason, "{#NODE}", "{#IFNAME}"]

Preprocessing

  • Discard unchanged with heartbeat: 6h

Trigger prototypes for Network ports discovery

Name Description Expression Severity Dependencies and additional info
Node {#NODE}: port {#IFNAME} ({#TYPE}): High error rate

It recovers when it is below 80% of the {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

 min(/NetApp FAS3220 by SNMP/fas3220.net.if[if64InErrors, "{#NODE}", "{#IFNAME}"],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/NetApp FAS3220 by SNMP/fas3220.net.if[if64OutErrors, "{#NODE}", "{#IFNAME}"],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} Warning Manual close: Yes
Node {#NODE}: port {#IFNAME} ({#TYPE}): Link down

Link state is not UP and the port status is set 'UP' by an administrator.

 last(/NetApp FAS3220 by SNMP/fas3220.net.port[netportLinkState, "{#NODE}", "{#IFNAME}"])<>2 and last(/NetApp FAS3220 by SNMP/fas3220.net.port[netportUpAdmin, "{#NODE}", "{#IFNAME}"])=1 Average Manual close: Yes
Node {#NODE}: port {#IFNAME} ({#TYPE}): Port is not healthy

{{ITEM.LASTVALUE2}.regsub("(.*)", \1)}

 last(/NetApp FAS3220 by SNMP/fas3220.net.port[netportHealthStatus, "{#NODE}", "{#IFNAME}"])<>0 and length(last(/NetApp FAS3220 by SNMP/fas3220.net.port[netportDegradedReason, "{#NODE}", "{#IFNAME}"]))>0 Info

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Články a dokumentace

+ Navrhněte nový článek

Nenašli jste integraci, kterou potřebujete?

Požádejte o vlastní integraci

Integrační tým Zabbix vyvine vlastní integraci na základě vašich požadavků a osvědčených postupů Zabbixu.

Požádat

Nahrajte svou integraci

Vyvinuli jste již vysoce kvalitní integraci a chcete ji nahrát do integračního úložiště Zabbix?

Navrhnout