Juniper

Juniper

Juniper Networks, Inc. develops and markets networking products including routers, switches, network management software, network security products and software-defined networking technology.

Dostupná řešení




This template is for Zabbix version: 7.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/juniper_snmp?at=release/7.0

Juniper by SNMP

Macros used

Name Description Default
{$TEMP_CRIT} 60
{$TEMP_CRIT_LOW} 5
{$TEMP_WARN} 50
{$TEMP_CRIT:"Routing Engine"} 80
{$TEMP_WARN:"Routing Engine"} 70
{$HEALTH_CRIT_STATUS} 3
{$FAN_CRIT_STATUS} 6
{$PSU_CRIT_STATUS} 6
{$MEMORY.UTIL.MAX} 90
{$CPU.UTIL.CRIT} 90
{$SNMP.TIMEOUT}

Time interval for the SNMP availability trigger.

 5m
{$ICMP_LOSS_WARN}

Warning threshold of ICMP packet loss in %.

 20
{$ICMP_RESPONSE_TIME_WARN}

Warning threshold of the average ICMP response time in seconds.

 0.15
{$IF.ERRORS.WARN}

Warning threshold of error packet rate. Can be used with interface name as context.

 2
{$IF.UTIL.MAX} 90
{$IFCONTROL} 1
{$NET.IF.IFNAME.MATCHES} ^.*$
{$NET.IF.IFNAME.NOT_MATCHES}

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

 Macro too long. Please see the template.
{$NET.IF.IFOPERSTATUS.MATCHES} ^.*$
{$NET.IF.IFOPERSTATUS.NOT_MATCHES}

Ignore notPresent(6)

 ^6$
{$NET.IF.IFADMINSTATUS.MATCHES} ^.*
{$NET.IF.IFADMINSTATUS.NOT_MATCHES}

Ignore down(2) administrative status

 ^2$
{$NET.IF.IFDESCR.MATCHES} .*
{$NET.IF.IFDESCR.NOT_MATCHES} CHANGE_IF_NEEDED
{$NET.IF.IFALIAS.MATCHES} .*
{$NET.IF.IFALIAS.NOT_MATCHES} CHANGE_IF_NEEDED
{$NET.IF.IFTYPE.MATCHES} .*
{$NET.IF.IFTYPE.NOT_MATCHES} CHANGE_IF_NEEDED

Items

Name Description Type Key and additional info
Overall system health status

MIB: JUNIPER-ALARM-MIB

The red alarm indication on the craft interface panel.

The red alarm is on when there is some system

failure or power supply failure or the system

is experiencing a hardware malfunction or some

threshold is being exceeded.

This red alarm state could be turned off by the

ACO/LT (Alarm Cut Off / Lamp Test) button on the

front panel module.

 SNMP agent system.status[jnxRedAlarmState.0]
Hardware serial number

MIB: JUNIPER-MIB

The serial number of this subject, blank if unknown or unavailable.

 SNMP agent system.hw.serialnumber

Preprocessing

  • Discard unchanged with heartbeat: 1d
Hardware model name

MIB: JUNIPER-MIB

The name, model, or detailed description of the box,indicating which product the box is about, for example 'M40'.

 SNMP agent system.hw.model

Preprocessing

  • Discard unchanged with heartbeat: 1d
Operating system

MIB: SNMPv2-MIB

 SNMP agent system.sw.os[sysDescr.0]

Preprocessing

  • Regular expression: kernel (JUNOS [0-9a-zA-Z\.\-]+) \1

  • Discard unchanged with heartbeat: 1d
Uptime (network)

MIB: SNMPv2-MIB

Time (in hundredths of a second) since the network management portion of the system was last re-initialized.

 SNMP agent system.net.uptime[sysUpTime.0]

Preprocessing

  • Custom multiplier: 0.01
Uptime (hardware)

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

 SNMP agent system.hw.uptime[hrSystemUptime.0]

Preprocessing

  • Check for not supported value: any error

    ⛔️Custom on fail: Set value to: 0

  • Custom multiplier: 0.01
SNMP traps (fallback)

The item is used to collect all SNMP traps unmatched by other snmptrap items

 SNMP trap snmptrap.fallback
System location

MIB: SNMPv2-MIB

Physical location of the node (e.g., equipment room, 3rd floor). If not provided, the value is a zero-length string.

 SNMP agent system.location[sysLocation.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
System contact details

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

 SNMP agent system.contact[sysContact.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
System object ID

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

 SNMP agent system.objectid[sysObjectID.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
System name

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

 SNMP agent system.name

Preprocessing

  • Discard unchanged with heartbeat: 12h
System description

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

 SNMP agent system.descr[sysDescr.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
SNMP agent availability

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible values:

0 - not available

1 - available

2 - unknown

 Zabbix internal zabbix[host,snmp,available]
ICMP ping Simple check icmpping
ICMP loss Simple check icmppingloss
ICMP response time Simple check icmppingsec

Triggers

Name Description Expression Severity Dependencies and additional info
System status is in critical state

Please check the device for errors

 count(/Juniper by SNMP/system.status[jnxRedAlarmState.0],#1,"eq","{$HEALTH_CRIT_STATUS}")=1 High
Device has been replaced

Device serial number has changed. Acknowledge to close the problem manually.

 last(/Juniper by SNMP/system.hw.serialnumber,#1)<>last(/Juniper by SNMP/system.hw.serialnumber,#2) and length(last(/Juniper by SNMP/system.hw.serialnumber))>0 Info Manual close: Yes
Operating system description has changed

Operating system description has changed. Possible reasons that system has been updated or replaced. Acknowledge to close the problem manually.

 last(/Juniper by SNMP/system.sw.os[sysDescr.0],#1)<>last(/Juniper by SNMP/system.sw.os[sysDescr.0],#2) and length(last(/Juniper by SNMP/system.sw.os[sysDescr.0]))>0 Info Manual close: Yes
Depends on:
  • System name has changed
Host has been restarted

Uptime is less than 10 minutes.

 (last(/Juniper by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/Juniper by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/Juniper by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/Juniper by SNMP/system.net.uptime[sysUpTime.0])<10m) Warning Manual close: Yes
Depends on:
  • No SNMP data collection
System name has changed

The name of the system has changed. Acknowledge to close the problem manually.

 last(/Juniper by SNMP/system.name,#1)<>last(/Juniper by SNMP/system.name,#2) and length(last(/Juniper by SNMP/system.name))>0 Info Manual close: Yes
No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

 max(/Juniper by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0 Warning Depends on:
  • Unavailable by ICMP ping
Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

 max(/Juniper by SNMP/icmpping,#3)=0 High
High ICMP ping loss min(/Juniper by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Juniper by SNMP/icmppingloss,5m)<100 Warning Depends on:
  • Unavailable by ICMP ping
High ICMP ping response time

Average ICMP response time is too high.

 avg(/Juniper by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN} Warning Depends on:
  • High ICMP ping loss
  • Unavailable by ICMP ping

LLD rule CPU and Memory Discovery

Name Description Type Key and additional info
CPU and Memory Discovery

Scanning JUNIPER-MIB::jnxOperatingTable for CPU and Memory

http://kb.juniper.net/InfoCenter/index?page=content&id=KB17526&actp=search. Filter limits results to Routing Engines

 SNMP agent jnxOperatingTable.discovery

Item prototypes for CPU and Memory Discovery

Name Description Type Key and additional info
{#SNMPVALUE}: CPU utilization

MIB: JUNIPER-MIB

The CPU utilization in percentage of this subject. Zero if unavailable or inapplicable.

Reference: http://kb.juniper.net/library/CUSTOMERSERVICE/GLOBAL_JTAC/BK26199/SRX%20SNMP%20Monitoring%20Guide_v1.1.pdf

 SNMP agent system.cpu.util[jnxOperatingCPU.{#SNMPINDEX}]
{#SNMPVALUE}: Memory utilization

MIB: JUNIPER-MIB

The buffer pool utilization in percentage of this subject. Zero if unavailable or inapplicable.

Reference: http://kb.juniper.net/library/CUSTOMERSERVICE/GLOBAL_JTAC/BK26199/SRX%20SNMP%20Monitoring%20Guide_v1.1.pdf

 SNMP agent vm.memory.util[jnxOperatingBuffer.{#SNMPINDEX}]

Trigger prototypes for CPU and Memory Discovery

Name Description Expression Severity Dependencies and additional info
{#SNMPVALUE}: High CPU utilization

The CPU utilization is too high. The system might be slow to respond.

 min(/Juniper by SNMP/system.cpu.util[jnxOperatingCPU.{#SNMPINDEX}],5m)>{$CPU.UTIL.CRIT} Warning
{#SNMPVALUE}: High memory utilization

The system is running out of free memory.

 min(/Juniper by SNMP/vm.memory.util[jnxOperatingBuffer.{#SNMPINDEX}],5m)>{$MEMORY.UTIL.MAX} Average

LLD rule Temperature discovery

Name Description Type Key and additional info
Temperature discovery

Scanning JUNIPER-MIB::jnxOperatingTable for Temperature

http://kb.juniper.net/InfoCenter/index?page=content&id=KB17526&actp=search. Filter limits results to Routing Engines

 SNMP agent jnxOperatingTable.discovery.temp

Item prototypes for Temperature discovery

Name Description Type Key and additional info
{#SENSOR_INFO}: Temperature

MIB: JUNIPER-MIB

The temperature in Celsius (degrees C) of {#SENSOR_INFO}

 SNMP agent sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}]

Trigger prototypes for Temperature discovery

Name Description Expression Severity Dependencies and additional info
{#SENSOR_INFO}: Temperature is above warning threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

 avg(/Juniper by SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SENSOR_INFO}"} Warning Depends on:
  • {#SENSOR_INFO}: Temperature is above critical threshold
{#SENSOR_INFO}: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

 avg(/Juniper by SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SENSOR_INFO}"} High
{#SENSOR_INFO}: Temperature is too low avg(/Juniper by SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SENSOR_INFO}"} Average

LLD rule FAN Discovery

Name Description Type Key and additional info
FAN Discovery

Scanning JUNIPER-MIB::jnxOperatingTable for Fans

 SNMP agent jnxOperatingTable.discovery.fans

Item prototypes for FAN Discovery

Name Description Type Key and additional info
{#SNMPVALUE}: Fan status

MIB: JUNIPER-MIB

 SNMP agent sensor.fan.status[jnxOperatingState.4.{#SNMPINDEX}]

Trigger prototypes for FAN Discovery

Name Description Expression Severity Dependencies and additional info
{#SNMPVALUE}: Fan is in critical state

Please check the fan unit

 count(/Juniper by SNMP/sensor.fan.status[jnxOperatingState.4.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS}")=1 Average

LLD rule PSU Discovery

Name Description Type Key and additional info
PSU Discovery

Scanning JUNIPER-MIB::jnxOperatingTable for Power Supplies

 SNMP agent jnxOperatingTable.discovery.psu

Item prototypes for PSU Discovery

Name Description Type Key and additional info
{#SNMPVALUE}: Power supply status

MIB: JUNIPER-MIB

If they are using DC power supplies there is a known issue on PR 1064039 where the fans do not detect the temperature correctly and fail to cool the power supply causing the shutdown to occur.

This is fixed in Junos 13.3R7 https://forums.juniper.net/t5/Routing/PEM-0-not-OK-MX104/m-p/289644#M14122

 SNMP agent sensor.psu.status[jnxOperatingState.2.{#SNMPINDEX}]

Trigger prototypes for PSU Discovery

Name Description Expression Severity Dependencies and additional info
{#SNMPVALUE}: Power supply is in critical state

Please check the power supply unit for errors

 count(/Juniper by SNMP/sensor.psu.status[jnxOperatingState.2.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS}")=1 Average

LLD rule Network interfaces discovery

Name Description Type Key and additional info
Network interfaces discovery

Discovering interfaces from IF-MIB.

 SNMP agent net.if.discovery

Item prototypes for Network interfaces discovery

Name Description Type Key and additional info
Interface {#IFNAME}({#IFALIAS}): Operational status

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

 SNMP agent net.if.status[ifOperStatus.{#SNMPINDEX}]
Interface {#IFNAME}({#IFALIAS}): Bits received

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

 SNMP agent net.if.in[ifHCInOctets.{#SNMPINDEX}]

Preprocessing

  • Change per second

  • Custom multiplier: 8
Interface {#IFNAME}({#IFALIAS}): Bits sent

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

 SNMP agent net.if.out[ifHCOutOctets.{#SNMPINDEX}]

Preprocessing

  • Change per second

  • Custom multiplier: 8
Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

 SNMP agent net.if.in.errors[ifInErrors.{#SNMPINDEX}]

Preprocessing

  • Change per second
Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

 SNMP agent net.if.out.errors[ifOutErrors.{#SNMPINDEX}]

Preprocessing

  • Change per second
Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

 SNMP agent net.if.out.discards[ifOutDiscards.{#SNMPINDEX}]

Preprocessing

  • Change per second
Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

 SNMP agent net.if.in.discards[ifInDiscards.{#SNMPINDEX}]

Preprocessing

  • Change per second
Interface {#IFNAME}({#IFALIAS}): Interface type

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

 SNMP agent net.if.type[ifType.{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 1d
Interface {#IFNAME}({#IFALIAS}): Speed

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range of n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

 SNMP agent net.if.speed[ifHighSpeed.{#SNMPINDEX}]

Preprocessing

  • Custom multiplier: 1000000

  • Discard unchanged with heartbeat: 1h

Trigger prototypes for Network interfaces discovery

Name Description Expression Severity Dependencies and additional info
Interface {#IFNAME}({#IFALIAS}): Link down

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine the context macro to "0", marking this interface as not important. No new trigger will be fired if this interface is down.
3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, does not fire for "eternal off" interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

 {$IFCONTROL:"{#IFNAME}"}=1 and last(/Juniper by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Juniper by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Juniper by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2)) Average Manual close: Yes
Interface {#IFNAME}({#IFALIAS}): High bandwidth usage

The utilization of the network interface is close to its estimated maximum bandwidth.

 (avg(/Juniper by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Juniper by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Juniper by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Juniper by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Juniper by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 Warning Manual close: Yes
Depends on:
  • Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): High error rate

It recovers when it is below 80% of the {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

 min(/Juniper by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Juniper by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} Warning Manual close: Yes
Depends on:
  • Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.

 change(/Juniper by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Juniper by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Juniper by SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Juniper by SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Juniper by SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Juniper by SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Juniper by SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Juniper by SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Juniper by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2) Info Manual close: Yes
Depends on:
  • Interface {#IFNAME}({#IFALIAS}): Link down

LLD rule EtherLike-MIB Discovery

Name Description Type Key and additional info
EtherLike-MIB Discovery

Discovering interfaces from IF-MIB and EtherLike-MIB. Interfaces with up(1) Operational Status are discovered.

 SNMP agent net.if.duplex.discovery

Preprocessing

  • JavaScript: The text is too long. Please see the template.

Item prototypes for EtherLike-MIB Discovery

Name Description Type Key and additional info
Interface {#IFNAME}({#IFALIAS}): Duplex status

MIB: EtherLike-MIB

The current mode of operation of the MAC

entity. 'unknown' indicates that the current

duplex mode could not be determined.

Management control of the duplex mode is

accomplished through the MAU MIB. When

an interface does not support autonegotiation,

or when autonegotiation is not enabled, the

duplex mode is controlled using

ifMauDefaultType. When autonegotiation is

supported and enabled, duplex mode is controlled

using ifMauAutoNegAdvertisedBits. In either

case, the currently operating duplex mode is

reflected both in this object and in ifMauType.

Note that this object provides redundant

information with ifMauType. Normally, redundant

objects are discouraged. However, in this

instance, it allows a management application to

determine the duplex status of an interface

without having to know every possible value of

ifMauType. This was felt to be sufficiently

valuable to justify the redundancy.

Reference: [IEEE 802.3 Std.], 30.3.1.1.32,aDuplexStatus.

 SNMP agent net.if.duplex[dot3StatsDuplexStatus.{#SNMPINDEX}]

Trigger prototypes for EtherLike-MIB Discovery

Name Description Expression Severity Dependencies and additional info
Interface {#IFNAME}({#IFALIAS}): In half-duplex mode

Please check autonegotiation settings and cabling.

 last(/Juniper by SNMP/net.if.duplex[dot3StatsDuplexStatus.{#SNMPINDEX}])=2 Warning Manual close: Yes

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Články a dokumentace

+ Navrhněte nový článek

Nenašli jste integraci, kterou potřebujete?

Požádejte o vlastní integraci

Integrační tým Zabbix vyvine vlastní integraci na základě vašich požadavků a osvědčených postupů Zabbixu.

Požádat

Nahrajte svou integraci

Vyvinuli jste již vysoce kvalitní integraci a chcete ji nahrát do integračního úložiště Zabbix?

Navrhnout